Duilleag titanium agus clàr
• Stuthan duilleag titanium: Gr1, Gr2, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23
• Cumaidhean: Duilleag cumadh, duilleag rollaidh fhuar, duilleag rollaidh teth
• Meud:Tighead: 0.3 ～ 5mm, leud: 400 ~ 3000mm, Fad: ≤6000mm
• Cùmhnantan:Cruthachadh teth & roiligeadh teth, fuar-roiligeadh, fuasgladh ann an òrdugh
• Inbhean:ASTM B265, AMS 4911, AMS 4902, ASTM F67, ASTM F136 etc
| Ainm Coitcheann Stuth Titanium Alloys | ||
| Gr1 | UNS R50250 | CP-Ti |
| Gr2 | UNS R50 400 | CP-Ti |
| Gr4 | UNS R50700 | CP-Ti |
| Gr7 | UNS R52400 | Ti-0.20Pd |
| G9 | UNS R56320 | Ti-3AL-2.5V |
| G11 | UNS R52250 | Ti-0.15Pd |
| G12 | UNS R53400 | Ti-0.3Mo-0.8Ni |
| G16 | UNS R52402 | Ti-0.05Pd |
| G23 | UNS R56407 | Ti-6Al-4V ELI |
Duilleag Titanium agus Plate Titanium:Bidh sinn sa mhòr-chuid a’ toirt seachad duilleag titanium fìor-ghlan de ìrean Gr1, Gr2, Gr4;Airson duilleag alloy titanium, bidh sinn sa mhòr-chuid a ’toirt seachad Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 agus ìrean eile, Tha iad air an toirt a-mach air bunait truinnsear titanium le tuilleadh roiligeadh fuar;tha pròiseas cinneasachaidh duilleag titanium nas iom-fhillte.Tha an deformation smachd nas cruaidhe ann am pròiseas rolling.That faodar a ghearradh ann an diofar mheudan a rèir feumalachdan an neach-ceannach, gu mòr a ghiorrachadh an ùine lìbhrigidh.
♦ Duilleag Titanium Co-dhèanamh ceimigeach ♦
| Ìre | Co-dhèanamh ceimigeach, cuideam sa cheud (%) | ||||||||||||
| C (≤) | O (≤) | N (≤) | H (≤) | Fe (≤) | Al | V | Pd | Ru | Ni | Mo | Eileamaidean eile Max.each | Eileamaidean eile Max.iomlan | |
| Gr1 | 0.08 | 0.18 | 0.03 | 0.015 | 0.20 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr2 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr4 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr5 | 0.08 | 0.20 | 0.05 | 0.015 | 0.40 | 5.56.75 | 3.5 4.5 | - | - | - | - | 0.1 | 0.4 |
| Gr7 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | 0.12 0.25 | - | 0.12 0.25 | - | 0.1 | 0.4 |
| Gr9 | 0.08 | 0.15 | 0.03 | 0.015 | 0.25 | 2.5 3.5 | 2.0 3.0 | - | - | - | - | 0.1 | 0.4 |
| Gr11 | 0.08 | 0.18 | 0.03 | 0.15 | 0.2 | - | - | 0.12 0.25 | - | - | - | 0.1 | 0.4 |
| Gr12 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | - | - | - | - | 0.6 0.9 | 0.2 0.4 | 0.1 | 0.4 |
| Gr16 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | - | - | 0.04 0.08 | - | - | - | 0.1 | 0.4 |
| Gr23 | 0.08 | 0.13 | 0.03 | 0.125 | 0.25 | 5.5 6.5 | 3.5 4.5 | - | - | - | - | 0.1 | 0.1 |
♦Duilleag alloy TitanumFeartan fiosaigeach ♦
| Ìre | Feartan fiosaigeach | |||||||
| Neart tensile Min | Neart toraidhMin (0.2%, air a chothromachadh) | Meudachadh ann an 4d Min (%) | Lùghdachadh Sgìre Min (%) | Deuchainn lùb (radius of Mandrel) | ||||
| ksi | MPa | ksi | MPa | ＜1.8mm Ann an tiugh | 1.8-4.8mm Ann an tiugh | |||
| Gr1 | 35 | 240 | 20 | 138 | 24 | 30 | 1.5T | 2.0T |
| Gr2 | 50 | 345 | 40 | 275 | 20 | 30 | 2.0T | 2.5T |
| Gr4 | 80 | 550 | 70 | 483 | 15 | 25 | 2.5T | 3.0T |
| Gr5 | 130 | 895 | 120 | 828 | 10 | 25 | 4.5T | 5.0T |
| Gr7 | 50 | 345 | 40 | 275 | 20 | 30 | 2.0T | 2.5T |
| Gr9 | 90 | 620 | 70 | 483 | 15 | 25 | 2.5T | 3.0T |
| Gr11 | 35 | 240 | 20 | 138 | 24 | 30 | 1.5T | 2.0T |
| Gr12 | 70 | 483 | 50 | 345 | 18 | 25 | 2.0T | 2.5T |
| Gr16 | 50 | 345 | 40 | 275 | 20 | 30 | 2.0T | 2.5T |
| Gr23 | 120 | 828 | 110 | 759 | 10 | 15 | 4.5T | 5.0T |
