Flange Titanium
Flanaichean Titanium:Bidh flange alloy titanium gu tric air a chleachdadh ann an drileadh ola, innleadaireachd mara, gnìomhachas innealan agus uidheamachd ann am prìomh phàirtean cuideam a ’cheangail.tha an flange titanium fìor-ghlan air a chleachdadh gu mòr airson cinn tiùba a’ phròiseict pheitriceimiceach a cheangal.Tha e feumail cuideachd ann an slighe a-mach uidheamachd agus slighe a-steach gus an dà inneal a cheangal.
Tha eòlas beairteach againn ann a bhith a 'cruthachadh agus a' innealachadh, a tha a 'dèanamh ar stuthan titanium flange a' cumail deagh chàileachd.
• Stuthan Titanium Flange: Titanium fìor-ghlan, Ìre 1, Ìre 2, Ìre 5, Ìre 5, Ìre 7, Ìre 9, Ìre 11, Ìre 12, Ìre 16, Ìre 23 msaa
• Seòrsan:
→ Flange truinnsear tàthaidh (PL） → Flange amhach slip-on (SO)
→ Flange amhach tàthaidh (WN) → flange aonaichte (IF)
→ Flange tàthaidh socaid (SW) → Flange snàthaichte (Th)
→ Flange co-cheangailte ri uchd (LJF) → Flange dall (BL(s))
• Tomhas: DN10～DN2000/1/2”NB gu 48”NB
• Inbhean:ASME B16.5, EN 1092, JIS 2201, AWWA C207, ASME B16.48
• Clas:150# 300# 400# 600# 900# 1500# 2500# PN6 PN10 PN16 PN25 PN40 PN63 5K 10K 20K 30K
| Titanium Alloys Material Ainm Coitcheann | ||
| Gr1 | UNS R50250 | CP-Ti |
| Gr2 | UNS R50 400 | CP-Ti |
| Gr4 | UNS R50700 | CP-Ti |
| Gr7 | UNS R52400 | Ti-0.20Pd |
| G9 | UNS R56320 | Ti-3AL-2.5V |
| G11 | UNS R52250 | Ti-0.15Pd |
| G12 | UNS R53400 | Ti-0.3Mo-0.8Ni |
| G16 | UNS R52402 | Ti-0.05Pd |
| G23 | UNS R56407 | Ti-6Al-4V ELI |
♦ Titanium Flange Chemical Composition ♦
| Ìre | Co-dhèanamh ceimigeach, cuideam sa cheud (%) | ||||||||||||
| C (≤) | O (≤) | N (≤) | H (≤) | Fe (≤) | Al | V | Pd | Ru | Ni | Mo | Eileamaidean eile Max.each | Eileamaidean eile Max.iomlan | |
| Gr1 | 0.08 | 0.18 | 0.03 | 0.015 | 0.20 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr2 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr4 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr5 | 0.08 | 0.20 | 0.05 | 0.015 | 0.40 | 5.56.75 | 3.5 4.5 | - | - | - | - | 0.1 | 0.4 |
| Gr7 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | 0.12 0.25 | - | 0.12 0.25 | - | 0.1 | 0.4 |
| Gr9 | 0.08 | 0.15 | 0.03 | 0.015 | 0.25 | 2.5 3.5 | 2.0 3.0 | - | - | - | - | 0.1 | 0.4 |
| Gr11 | 0.08 | 0.18 | 0.03 | 0.15 | 0.2 | - | - | 0.12 0.25 | - | - | - | 0.1 | 0.4 |
| Gr12 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | - | - | - | - | 0.6 0.9 | 0.2 0.4 | 0.1 | 0.4 |
| Gr16 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | - | - | 0.04 0.08 | - | - | - | 0.1 | 0.4 |
| Gr23 | 0.08 | 0.13 | 0.03 | 0.125 | 0.25 | 5.5 6.5 | 3.5 4.5 | - | - | - | - | 0.1 | 0.1 |
♦Flange TitanumFeartan corporra ♦
| Ìre | Feartan fiosaigeach | |||||
| Neart tensile Min | Neart toraidh Min (0.2%, air a chothromachadh) | Meudachadh ann an 4d Min (%) | Lùghdachadh Sgìre Min (%) | |||
| ksi | MPa | ksi | MPa | |||
| Gr1 | 35 | 240 | 20 | 138 | 24 | 30 |
| Gr2 | 50 | 345 | 40 | 275 | 20 | 30 |
| Gr4 | 80 | 550 | 70 | 483 | 15 | 25 |
| Gr5 | 130 | 895 | 120 | 828 | 10 | 25 |
| Gr7 | 50 | 345 | 40 | 275 | 20 | 30 |
| Gr9 | 90 | 620 | 70 | 483 | 15 | 25 |
| Gr11 | 35 | 240 | 20 | 138 | 24 | 30 |
| Gr12 | 70 | 483 | 50 | 345 | 18 | 25 |
| Gr16 | 50 | 345 | 40 | 275 | 20 | 30 |
| Gr23 | 120 | 828 | 110 | 759 | 10 | 15 |
♦♦♦ Titanium Alloy Stuthan Feartan: ♦♦♦
•Ìre 1: Titanium Pure, neart gu ìre ìosal agus sùbailteachd àrd.
•Ìre 2: An titanium fìor-ghlan as motha a chleachdar.Am measgachadh as fheàrr de neart
•Ìre 3: Titanium àrd-neart, air a chleachdadh airson plataichean Matrix ann an luchd-iomlaid teas sligean is tiùba
•Ìre 5: An alloy titanium as dèante.Neart fìor àrd.an aghaidh teas àrd.
•Ìre 7: Superior an aghaidh corrach ann an àrainneachdan lughdachadh agus oxidizing.
•Ìre 9: Neart fìor àrd agus strì an aghaidh creimeadh.
•Ìre 23: Titanium-6Aluminum-4Vanadium ELI (Eadar-roinneil a bharrachd) Alloy airson tagradh implant lannsaireachd.
