Diosc Titanium
Diosc Titaniummar as trice air a chleachdadh airson innealachadh a-steach do flange titanium no Titanium tubesheet airson uidheamachd iomlaid teas.
Mar chompanaidh le còrr air 20 bliadhna de eòlas cinneasachaidh, tha sreath de phròiseas cruthachaidh teann agus leabhar-làimhe obrachaidh againn, a’ toirt a-steach na ceumannan teasachaidh, ùine teasachaidh agus ùine gleidhidh teas.Bha an inneal cruthachadh luath 35MN agus 16MN a’ gealltainn gum biodh ioma-chruthachadh anns an raon teòthachd iomchaidh.Agus dh’ fhaodadh an teicneòlas cruthachadh structar corporra diosc titanium atharrachadh.Leasaich càileachd ìre diosc titanium gu mòr.
• Stuthan diosc titanium: Titanium fìor-ghlan, Ìre 1, Ìre 2, Ìre 5, Ìre 5, Ìre 7, Ìre 9, Ìre 11, Ìre 12, Ìre 16, Ìre 23 msaa
• Foirmean: Inbhean Meud no a rèir dealbh luchd-dèiligidh.
• Tomhas:OD: 150 ~ 1500mm, Tighead: 35 ~ 250mm, gnàthaichte
• Inbhean:ASTM B265, ASTM B381
• Sgrùdadh:Deuchainn co-dhèanamh ceimigeach → Deuchainn feartan corporra → Sgrùdadh macroscopach → Lorg locht ultrasonach → Sgrùdadh air lochdan coltas
| Titanium Alloys Material Ainm Coitcheann | ||
| Gr1 | UNS R50250 | CP-Ti |
| Gr2 | UNS R50 400 | CP-Ti |
| Gr4 | UNS R50700 | CP-Ti |
| Gr7 | UNS R52400 | Ti-0.20Pd |
| G9 | UNS R56320 | Ti-3AL-2.5V |
| G11 | UNS R52250 | Ti-0.15Pd |
| G12 | UNS R53400 | Ti-0.3Mo-0.8Ni |
| G16 | UNS R52402 | Ti-0.05Pd |
| G23 | UNS R56407 | Ti-6Al-4V ELI |
♦ Diosg Titanium Co-dhèanamh ceimigeach ♦
| Ìre | Co-dhèanamh ceimigeach, cuideam sa cheud (%) | ||||||||||||
| C (≤) | O (≤) | N (≤) | H (≤) | Fe (≤) | Al | V | Pd | Ru | Ni | Mo | Eileamaidean eile Max.each | Eileamaidean eile Max.iomlan | |
| Gr1 | 0.08 | 0.18 | 0.03 | 0.015 | 0.20 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr2 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr4 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | - | - | - | - | 0.1 | 0.4 |
| Gr5 | 0.08 | 0.20 | 0.05 | 0.015 | 0.40 | 5.56.75 | 3.5 4.5 | - | - | - | - | 0.1 | 0.4 |
| Gr7 | 0.08 | 0.25 | 0.03 | 0.015 | 0.30 | - | - | 0.12 0.25 | - | 0.12 0.25 | - | 0.1 | 0.4 |
| Gr9 | 0.08 | 0.15 | 0.03 | 0.015 | 0.25 | 2.5 3.5 | 2.0 3.0 | - | - | - | - | 0.1 | 0.4 |
| Gr11 | 0.08 | 0.18 | 0.03 | 0.15 | 0.2 | - | - | 0.12 0.25 | - | - | - | 0.1 | 0.4 |
| Gr12 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | - | - | - | - | 0.6 0.9 | 0.2 0.4 | 0.1 | 0.4 |
| Gr16 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | - | - | 0.04 0.08 | - | - | - | 0.1 | 0.4 |
| Gr23 | 0.08 | 0.13 | 0.03 | 0.125 | 0.25 | 5.5 6.5 | 3.5 4.5 | - | - | - | - | 0.1 | 0.1 |
♦Diosc TitanumFeartan corporra ♦
| Ìre | Feartan fiosaigeach | |||||
| Neart tensile Min | Neart toraidh Min (0.2%, air a chothromachadh) | Meudachadh ann an 4d Min (%) | Lùghdachadh Sgìre Min (%) | |||
| ksi | MPa | ksi | MPa | |||
| Gr1 | 35 | 240 | 20 | 138 | 24 | 30 |
| Gr2 | 50 | 345 | 40 | 275 | 20 | 30 |
| Gr4 | 80 | 550 | 70 | 483 | 15 | 25 |
| Gr5 | 130 | 895 | 120 | 828 | 10 | 25 |
| Gr7 | 50 | 345 | 40 | 275 | 20 | 30 |
| Gr9 | 90 | 620 | 70 | 483 | 15 | 25 |
| Gr11 | 35 | 240 | 20 | 138 | 24 | 30 |
| Gr12 | 70 | 483 | 50 | 345 | 18 | 25 |
| Gr16 | 50 | 345 | 40 | 275 | 20 | 30 |
| Gr23 | 120 | 828 | 110 | 759 | 10 | 15 |
♦♦♦ Feartan stuthan Titanium Alloy: ♦♦♦
•Ìre 1: Titanium Pure, neart gu ìre ìosal agus sùbailteachd àrd.
•Ìre 2: An titanium fìor-ghlan as motha a chleachdar.Am measgachadh as fheàrr de neart
•Ìre 3: Titanium àrd-neart, air a chleachdadh airson plataichean Matrix ann an luchd-iomlaid teas sligean is tiùba
•Ìre 5: An alloy titanium as dèante.Neart fìor àrd.an aghaidh teas àrd.
•Ìre 7: Superior an aghaidh corrach ann an àrainneachdan lughdachadh agus oxidizing.
•Ìre 9: Neart fìor àrd agus strì an aghaidh creimeadh.
•Ìre 12: Seasmhachd teas nas fheàrr na Titanium fìor-ghlan.Iarrtasan mar airson Ìre 7 agus Ìre 11.
•Ìre 23: Titanium-6Aluminum-4Vanadium ELI (Eadar-roinneil a bharrachd) Alloy airson tagradh implant lannsaireachd.
